a story about an SG

stagekraft

New Member
Joined
Mar 19, 2013
Messages
14
Reaction score
20
Location
St.Louis area
Hey All,

I'm a noob to this site, I ran across it as I was looking for some info on an SG that I have.

I'm more of an LP guy, and I came across this SG quite by accident.

I don't really have any questions at this point, but I thought it would be fun to share this story.....

About 10 years ago, my son was a senior in high school, and he was hanging around with a girl (just friends) who lived with her mom in a rented house about a half mile from me.
Seems they had to move, and were selling some things to come up with some cash.
One evening my son brought this girl over to the house, and she had a guitar body that "one of her mom's boyfriends" had left in a closet (and it was just that, a body, no hardware, no electronics, no covers, etc),
my son had told her that I might buy it as I was into guitars.

Well, one look and I knew what it was, but I looked it over as if I really wasn't interested.
The neck looked straight, hardly any fret wear, but the body had a few dings in it,
I had no clue what she thought it was worth, so I told her I could give her $50 for it.
Obviously she thought that was rightious bucks and took the fifty.

(hmmm, was that wrong of me??)

At the time I really didn't have the cash to get the "right parts" for it, so I cobbled it together with some tuners, pickups, tune-o-matic parts and wiring I had lying around, I bought an aftermarket pickguard and truss rod cover off ebay, fab'd a cover for the wiring cavity out of a piece of stainless steel sheet I had.
I strung it up, seemed to play pretty good, but I really didn't have a need for it at the time, so I packed it away with my other closet guitars for future evaluation......

So I recently dug it out and started doing some research on the year and model.

A lookup of the serial number, 82018584, tells me the guitar was made at;

Nashville Plant, TN, USA
July 20th, 1988
Production Number: 84

And comparing the body style to others I've found at this forum and others websites, it seem that what I have is a 1988 '62 Reissue.....

And from what I've read, that seems to be a well respected model to have....

I think I'll start looking at finding some period correct parts for it.....

Regards,
John
 

dbb

Well-Known Member
Joined
Feb 18, 2009
Messages
9,958
Reaction score
3,776
Location
California
That's a fine SG body.....have fun putting it together. I'd get a set of 57/57+ humbuckers.
 

iblive

Well-Known Member
Joined
May 9, 2009
Messages
2,420
Reaction score
945
Location
North East Illinois
:photos:

Stories like that are fun. My son's wife's uncle gave my kid a 70s something Yamaha acoustic. The story goes that the Uncle had a young lady renter that didn't have the rent money that month and wondered if she could barter with her boy friends guitar. Nice guy that he is, Uncle says sure... that'll work. Boyfriend was said to be - Rick Nielsen of Cheap Trick fame.
 

stagekraft

New Member
Joined
Mar 19, 2013
Messages
14
Reaction score
20
Location
St.Louis area
Hey all,

I'll bump this old thread since it refers to this SG I posted about....

I finally got around to spending some money on this guitar, remove the
junk hardware and install something decent.

I put on a set of Kluson tuners, and bought a set of SD pup's,
then decided to replace the wiring harness.

I figured the quick and easy way was to buy a prewired harness from a reputable builder.

As you recall from my original post, I bought this SG as just a bare body, so I never saw the original hardware.

When I first loaded it up with some old stuff I had laying around, I had an issue with the
toggle switch not being long enough to go through the wood of the SG, I just figured it was
wrong switch (perhaps one meant to mount through a pickguard), and without the trim washer
or the legend plate I was just able to get the nut on it.

Now I got my shiny new harness, and have the same issue, I questioned the builder,
and they assured me that was the correct switch for an SG.

So, do I have some oddball SG? IS there some special switch with a longer bushing?

Anybody else had this issue?

Regards, John
 

stagekraft

New Member
Joined
Mar 19, 2013
Messages
14
Reaction score
20
Location
St.Louis area
thanks Raiyn,

Yeah, I just realized this as I was looking at the Steward MacDonald website, that there is a "Recessed" nut for the SG....

I wonder why my "reputable builder" didn't supply this nut if they knew the wire harness was for an SG?
And why the gal I've been exchanging emails with didn't know this?

"Things that make you go Hmmmmm"

Regards,
JohnR
 

Raiyn

Well-Known Member
Joined
Mar 16, 2016
Messages
4,947
Reaction score
2,794
Location
St. Pete FL
thanks Raiyn,

Yeah, I just realized this as I was looking at the Steward MacDonald website, that there is a "Recessed" nut for the SG....

I wonder why my "reputable builder" didn't supply this nut if they knew the wire harness was for an SG?
And why the gal I've been exchanging emails with didn't know this?

"Things that make you go Hmmmmm"

Regards,
JohnR
Because they build a ton of these things and more often than not the customer either has one from the old switch or has done their homework and bought one to CYA. That, plus they cost extra / don't come with the switches.

The only reason I thought to buy one for my project (I built my harness from scratch) was because I did my homework and came across someone who had neglected to get one.

Hopefully this minor inconvenience will help someone else down the line.
 
Last edited:

Raiyn

Well-Known Member
Joined
Mar 16, 2016
Messages
4,947
Reaction score
2,794
Location
St. Pete FL
Rules of the internet.....
254.jpg
 


Latest posts

Top